Connecting Expansion Module With A Paired Device - Avaya Vantage K155 Manual

Avaya Connect Expansion Module usage
6. (Optional) Ensure that the code displayed in the request matches the code on the
Expansion Module application.
7. Tap Yes to accept the connection request.
The Expansion Module application refreshes and loads the feature buttons based on the
buttons assigned for your extension.
Related links
Enabling the Expansion Module service on Avaya Vantage
Checking the IP address of the Avaya Vantage device
Checking the IP address of the Avaya Vantage device
Checking the IP address of the Avaya Vantage
About this task
Use this procedure if you need to find the IP address of your Avaya Vantage
Procedure
1. From the Settings menu on the device, navigate to System > About Avaya Vantage.
2. Under the Network Information section, check for the device IP address.

Connecting Expansion Module with a paired device

About this task
On the Expansion Module application, you can select from the already paired devices to establish
a quick connection with Avaya Vantage
verification code to establish a connection with a paired device.
Before you begin
Ensure that the Expansion Module service is enabled on Avaya Vantage
Procedure
1. Open the Avaya Connect Expansion Module application.
2. Tap Connect to a paired device.
3. On the Paired devices screen, tap the device to which you want to connect the application.
The Expansion Module application refreshes and loads the feature buttons based on the
buttons assigned for your extension.
April 2021
on page 120
on page 120
™
built-in UC experience. You do not need to confirm a
Using Avaya Vantage
Comments on this document? infodev@avaya.com
on page 116
™
device
™
device.
™
.
™
120