Viewing Sca Configuration - Avaya J169 Manual

5. To set up the indication type, scroll to Incoming indication and toggle one of the following:
• Audible — the phone plays a ringtone when there is an incoming call on a shared line.
• Visual — the phone displays a pop-up message when there is an incoming call on a
shared line.
• Both — the phone uses both indication types.
• None — the phone does not alert you about incoming calls on this shared line.
• Default — the phone uses the administrator set value.
6. Scroll to Indication delay.
7. Enter the number of seconds for incoming call alert delay.
8. Press Save to save your settings.
9. (Optional) Press Cancel to revert to default settings.
Related links
Shared call appearance

Viewing SCA configuration

About this task
View the configuration of the additional SCA extensions. Depending on the phone's settings, you
can view or modify the SCA configuration.
Before you begin
Ensure that your administrator has configured a shared primary extension.
Procedure
1. Press
2. Scroll to Settings, and press one of the following:
• Select
• OK
• The corresponding line key
3. Scroll to Shared lines, and press one of the following:
• Select
• OK
• The corresponding line key
4. Press Edit or the corresponding line key to view the following configuration information for
the selected shared line:
• Enabled/Disabled
April 2021
on page 94
Main menu.
Using Avaya J169 and J179 SIP IP Phones in Open SIP
Comments on this document? infodev@avaya.com
Shared call appearance
99