Pairing A Bluetooth Enabled Headset With Your Phone; Turning Button Clicks On And Off - Avaya J169 Manual

• Left Arrow key: To disable Bluetooth.
Note:
For some Bluetooth headsets, volume can be adjusted during the first call after
rebooting the phone. Toggle the slider of the pop-up panel to the right to increase the
volume, and to the left to decrease it.

Pairing a Bluetooth enabled headset with your phone

About this task
You can pair a maximum of ten Bluetooth enabled headsets with the phone, but you can use only
one headset at a time. The phone displays the list of available devices and paired devices.
Before you begin
• Ensure the wireless module is installed in your phone.
• Ensure that the administrator activates the feature. Contact your administrator for details.
• Ensure your Bluetooth headset is in pairing mode.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Devices, and press Select.
The phone scans and displays the list of Bluetooth enabled devices.
5. To pair a device, scroll to the headset, and press Pair.
6. To disconnect a paired headset, under Paired devices, press Disconct.
7. To unpair a paired headset, under Paired devices, press Forget.
Related links
Pairing a Bluetooth Headset to the J179 Phone

Turning button clicks on and off

Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Use the Down Arrow key to go to the Button clicks screen.
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP
Comments on this document? infodev@avaya.com
Audio
145