Table of Contents
Advertisement
4. Remove the bottom dust cover from the disk pack canister by squeezing
together the two slide buttons on its underside, as shown in Figure 3-3.
Avoid contact with the exposed disks inside the canister.
Figure 3-3: Removing Bottom Dust Cover from an RA60 Disk Pack
BOTTOM VIEW
DISK PACK
HANDLE
DISK PACK
CANISTER
BOTTOM DUST
COVER
SQUEEZE THESE TWO
SLIDE BUTTONS IN
TO REMOVE BOTTOM
DUST COVER
MLO-1226-87
5. Lifting the canister solely by its handle, set the pack onto the disk spindle.
6. Using one hand to turn the handle and the other to hold the disk pack
stationary, press down on the handle and rotate it to the right until it
stops.
7. Remove the disk pack canister from the disk pack.
8. Place the empty disk pack canister on the bottom dust cover.
9. Close the RA60 drive cover.
Using System Options 3-7
Advertisement
Table of Contents
