Inserting An Ra60 Disk Pack - Digital Equipment MicroVAX 3600 Operation

3.1.1.2 Inserting an RA60 Disk Pack
The RA60 removable disk drive is located at the top of the cabinet. You
insert and remove disk packs from the top of the system.
Insert a disk pack as follows:
1. Set the power switch on the system control panel to 1. You cannot open
the RA60 disk drive unless the system is turned on.
2. Make sure the RUN/STOP button is in the out (not lit) position.
3. Press the cover release button on the RA60 disk drive control panel and
raise the disk drive cover, as shown in Figure 3-2.
Figure 3-2: Opening the RA60 Disk Drive
DISK SPINDLE
COVER RELEASE
BUTTON
FRONT COVER
MLO-1225-87
RUN/STOP
BUTTON
3-6 MicroVAX 3600 VAXserver 3600/3602 Operation