With Modem Support - Digital Equipment MicroVAX 3600 Operation

4. Make sure the "Receive Speed" option in the "Current Setting" column
is set to "receive=transmit." Use the down arrow to move the cursor
to this option, and the left and right arrows to change the setting.
5. Press
Select
to return to the Set-Up Directory screen.
6. Use the arrow keys to select the "Global Set-Up" option and press
Enter
7. Select the option "Comm Port".
8. If the port in the "Current Settting" column is selected for "RS-232",
press
Enter
to select the "DEC-423" port.
9. Press
Select
to return to the Set-Up Directory screen.
10. Use the arrow keys to select the "Save Current Settings" option. Press
Enter
to save all current settings; then press
Set-Up
to exit the Set-Up
Directory.
For VT200-series terminals:
1. Press
Set-Up
to display the Set-Up Directory screen.
2. Use the arrow keys to select the "Default" option and press
Default correctly sets all values except transmit speed.
3. Use the arrow keys to select the "Comm" option and press
to
display the Communications Set-Up menu.
4. Use the arrow keys to select the "Transmit" option and, using
set the speed to 9600.
5. Use the arrow keys to select the "To Directory" option and press
Enter,
,Enter
Enter
Enter
6. Use the arrow keys to select the "Save" option and press
Enter;
this
option stores the set-up values. Then press
Set-up
to exit the Set-Up
Directory.
Your operating system may have other requirements for using serial
communications devices. Refer to your system software manual.
3.2.1.2 With Modem Support
Using serial devices with modem control support requires that you install
two modems: one connected to the system and one connected to the remote
terminal. Both must be connected to phone lines.
3-38 MicroVAX 3600 VAXserver 3600/3602 Operation