Table of Contents
Advertisement
Figure 2-1: Language Selection Menu
l
1) Dansk
2) Deutsch
3) English
4) Espanol
5) Fran~ais
6) Italiano
(1..11):
7) Nederlands
8) Norsk
9) Portugu~s
10) Suomi
11) Svenska
MLO-1220-87
Select a language by typing in the number listed next to the language.
Save the language you have selected by rotating the Power-Up Mode
switch to Run Mode, indicated by an arrow. Once the system is booted,
reset the system clock as described in your system software manual.
•
If you want data on a particular fixed disk to be write-protected, you
must set the write-protect switch to in (glows).
NOTE: Disks containing system software and user accounts must remain write-
enabled. Disks containing applications or sensitive data may be write-protected.
2.3 Turning On the System
Once you have set the switches appropriately, you are ready to turn on the
system. The sliding plastic window must be fully open. If the window is not
open, turn the key to position 3 and lower the window.
Turn on the system as follows:
1. Turn on the console terminal and wait for it to complete its self-tests.
Using the System 2--3
Advertisement
Table of Contents
