Printer Options; Adding New Options - Digital Equipment MicroVAX 3600 Operation

• KWV 11—S
• AXV 11
• ADQ32
Before using areal-time controller, make sure the devices connected to the
controller are properly set up. Refer to documentation for the real-time
device.
3.2.5 Printer Options
Before using a printer, make sure it is properly set up and passes any self-
tests. Verify that the printer is connected to an appropriate controller. Some
printers, such as the LGO1 and LG02, require LPV11—SA interface. Other
printers require modem control signals. Consult your printer documentation
for the interface requirements.
3.3 Adding New Options
If you have available slots, you may be able to add new modules to your
system. Possible limitations to adding new modules include the following:
• Power limitations
• Physical space limitations
• Bus limitations (ac/dc loading)
Your DIGITAL sales representative can advise you about modules available for
your system and what you need to order. A DIGITAL service representative
should perform the installation, since the system must be properly configured
to work correctly.
CAUTION: Do not attempt to remove, rearrange, or install new modules.
Contact a DIGITAL service representative for assistance. If you want to perform
maintenance on your system, purchase the MicroVAX 3500 and MicroVAX 3600
Systems Maintenance Update.
Using System Options 3-41