Inserting Write-Enable Ring; Loading Tape - Digital Equipment MicroVAX 3600 Operation

3.1.3.2 Inserting Write-Enable Ring
Before mounting the reel of tape onto the supply hub, determine whether
or not write operations are to be performed on the tape. If yes, place a
write-enable ring into the bottom recessed portion of the reel, as shown in
Figure 3-11. When the reel is prepared, proceed with loading the tape.
Figure 3-11: Inserting Write-Enable Ring
WRITE-
ENABLE
RING
WRITE-
ENABLE
RING
GROOVE
MLO-1234-87
3.1.3.3 Loading Tape
Load the tape as follows:
NOTE: Most tapes have some form of stick-on tab or rubber block to prevent
the tape from unwinding during shipment or storage. Remove these items so that
the tape leader is free to unwind during the autoloading sequence.
1. Make sure the tape is wound completely onto the reel, and the write-
enable ring, if present, is fully seated.
2. Open the front door by gently pressing down on the top center of the
door.
3-24 MicroVAX 3600 VAXserver 3600/3602 Operation