Protective Cover Of V-Belt; Personal Protective Equipment; Safety During Operation - Optimum OPTI DRILL B20 Operating Manual

1.13

Protective cover of V-belt.

INFORMATION
The machine cannot be started, if the protective cover is not closed.
Protective cover
1.14

Personal protective equipment

For some works you need personnel protective equipment as protective equipment. These are

safety helmet,

protective glasses or face guard,

protective gloves,

safety shoes with steel toe caps,

ear protection.
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Soiled personal protection equipment that may be contaminated may cause illness.
Clean your personal protective equipment

after each use,

regularly once a week.
Personal protective equipment for special works
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
1.15

Safety during operation

We provide information about the specific dangers when working with and on the drilling
machine in the descriptions for these types of work.
WARNING!
Before switching on the drilling machine make sure that there are

no dangers generated for persons,

no objects are damaged.
Avoid any unsafe work methods:

Make sure that your operation does not create a safety hazard.

The rules specified in these operating instructions must be observed during assembly,
operation, maintenance and repair.
EN B20
14 Translation of original instruction Version 1.0 - 2020-08-11