Emissions; Delivery, Interdepartmental Transport And Unpacking; Notes On Transport, Installation And Unpacking; General Risks During Internal Transport - Optimum OPTI DRILL B20 Operating Manual

2.10

Emissions

The generation of noise emitted by the drilling machine is lower than 80 dB(A). If the drilling is
installed in an area where various machines are in operation, the noise exposure (immission)
on the operator of the drilling machine at the working place may exceed 80 dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
Furthermore, the noise emission also depends on production engineering factors, e.g. speed,
material and clamping conditions.
INFORMATION
The specified numerical value represents the emission level and does not necessarily a safe
working level. Though there is a dependency between the degree of the noise emission and the
degree of the noise disturbance it is not possible to use it reliably to determine if further precau-
tion measures are required or not. The following factors influence the actual degree of the noise
exposure of the operator:

Characteristics of the working area, e.g. size or damping behaviour,

other noise sources, e.g. the number of machines,

other processes taking place in proximity and the period of time, during which the operator
is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations. This information about the noise emission should, how-
ever, allow the operator of the machine to more easily evaluate the hazards and risks.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protection. We generally recommend the use
of noise and ear protection.
3

Delivery, interdepartmental transport and unpacking

CAUTION!
Injuries caused by parts falling over or off a forklift, pallet truck or transport vehicle. Only
use means of transport that can carry the total weight and are suitable for it.
3.1

Notes on transport, installation and unpacking

Improper transport of individual devices and minor machines, unsecured devices and minor
machines stacked on top of each other or next to each other in packed or already unpacked
condition is accident-prone and can cause damage or malfunctions for which we do not grant
any liability or guarantee.
Transport the scope of delivery secured against shifting or tilting with a sufficiently dimen-
sioned industrial truck to the installation site.
3.1.1

General risks during internal transport

CAUTION: DANGER OF TIPPING!
The device may be lifted unsecured by a maximum of 2cm.
EN B20
18 Translation of original instruction Version 1.0 - 2020-08-11