Operation; Control And Indicating Elements; Safety - Optimum OPTI DRILL B20 Operating Manual

4

Operation

4.1

Control and indicating elements

5
9
12
Pos. Designation
1 On
2 Emergency-stop switch
3 Off
Drill depth stop
4
Drill chuck guard
5
Belt drive with housing
6
Belt tension handle
7
4.2

Safety

Commission the machine only under the following conditions:

The machine is in proper working order.

The machine is used as prescribed.

The operating instructions are observed.

All safety devices are installed and activated.
Eliminate or have all malfunctions rectified promptly. Stop the machine immediately in the event
of any anomaly in operation and make sure it cannot be started up accidentally or without
authorization. Notify the person responsible immediately of any modification.
EN B20
26
1
7
3
2
13
8
10
11
Pos. Designation
8 Lever for spindle sleeve feed
9 Drilling table
10 Table height adjustment
11 Adjustment for the inclination of the table
12 Clamping lever
13 Direction of rotation switch (on 400V
machine only)
Translation of original instruction Version 1.0 - 2020-08-11