Product Overview; Introduction; Features - Toshiba BA410T Series Owner's Manual

1. PRODUCT OVERVIEW

1. PRODUCT OVERVIEW

1.1 Introduction

1.2 Features

Thank you for choosing the TOSHIBA BA410T series barcode printer.
This Owner's Manual contains from general set-up through to how to
confirm the printer operation using a test print, and should be read carefully
to help gain maximum performance and life from your printer. For most
queries please refer to this manual and keep it safe for future reference.
Please contact your TOSHIBA TEC representative for further information
concerning this manual.
This printer has the following features:
•
Space-saving design
The area required to allocate this printer is about the same as an A4
sheet of paper, even with both media and ribbon loaded. The Top Cover
opens upward, which also reduces the space needed for installation.
The optional cutter module and strip module are as slim and small and
fit inside the printer keeping the size compact.
•
Various interfaces possible
The following interfaces are available:
<Standard>
•
Bluetooth
•
USB
•
Built-in LAN
•
Superior hardware
Specially developed 8 dots/mm (203 dpi) (BA410T-GS12) or 11.8
dots/mm (300 dpi) (BA410T-TS12) print head enable very clear print,
at a printing speed of 50.8 mm/sec. (2 inches/sec.), 101.6 mm/sec. (4
inches/sec.), 152.4 mm/sec. (6 inches/sec.) or 203.2mm/sec (8
inches/sec).
•
Heavy-duty enclosure
As the enclosure is made of metal, the printer can be used in an
industrial environment such as a factory.
•
Easy maintenance
The printer is designed to be very easy to use. Especially, maintenance
simplified by the ease to attach and remove of the print head and platen.
•
Additional of options
The following optional devices are available:
•
Cutter module
•
Strip module
•
Serial interface board
•
Wireless LAN board
•
Expansion I/O board
•
Real Time Clock
•
Parallel interface board
•
UHF RFID Module
•
Fanfold Guide
1
E1-
<Option>
•
Serial
•
Wireless LAN
•
Expansion I/O
•
Parallel
ENGLISH VERSION
1.1 Introduction