Product Overview; Introduction; Features; Unpacking - Toshiba B-EX4T1 Series Owner's Manual

1. PRODUCT OVERVIEW

1. PRODUCT OVERVIEW

1.1 Introduction

1.2 Features

1.3 Unpacking

NOTES:
1. Check for damage or scratches
on the printer. However,
please note that TOSHIBA TEC
shall have no liability for any
damage of any kind sustained
during transportation of the
product.
2. Keep the cartons and internal
packing for future
transportation of the printer.
Thank you for choosing the TOSHIBA B-EX4T1 series bar code printer.
This Owner's Manual contains from general set-up through to how to
confirm the printer operation using a test print, and should be read carefully
to help gain maximum performance and life from your printer. For most
queries please refer to this manual and keep it safe for future reference.
Please contact your TOSHIBA TEC representative for further information
concerning this manual.
This printer has the following features:
 The print head block can be opened providing smooth loading of
media and ribbon.
 Various types of media can be used as the media sensors can be
moved from the center to the left edge of the media.
 Web based functions such as remote maintenance and other advanced
network features are available.
 Superior hardware, including the specially developed 8 dots/mm (203
dots/inch) or 12 dots/mm (305 dots/inch) thermal print head which
will allow very clear print at a printing speed of 3, 6, 10, 12 or 14
inches/sec. with 8 dots/mm thermal head or 3, 5, 8, 10, 12 or 14
inches/sec. with 12 dots/mm thermal head.
B-EX4T1-GS
200dpi
3ips
6ips
10ips
12ips
14ips
 Besides the optional Cutter Module, there is also an optional Peel off
Module, Ribbon Saving Module, RS-232C I/F card, Centronics I/F
card, Expansion I/O Card, Wireless LAN I/F card, the RTC/USB host
I/F card, RFID module, and Narrow width platen kit.
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
1
B-EX4T1-TS
305dpi
3ips
5ips
8ips
10ips
12ips
14ips