Adaptec Raid Configuration Utility (Arc); Overview - Adaptec 2025ZCR Installation And User Manual

Adaptec RAID
Configuration Utility (ARC)
In this Appendix...

Overview

Using the ACU
Using SATASelect and SCSISelect
Using the Disk Utilities
Viewing the Event Log
Overview
The Adaptec RAID Configuration (ARC) utility is part of the
controller BIOS. The utility includes:
Array Configuration Utility (ACU)—Used to create, configure,
and manage arrays, and make arrays bootable. Also used to
initialize and rescan drives. (Also available as a stand-alone
DOS utility as described in
SATASelect and SCSISelect—Used to change device and
controller settings.
Disk Utilities—Used to format or verify media.
To run the ARC utility, press Ctrl+A when prompted by the
following message during system startup:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
Appendix B, ACU for
A
A-1
A-2
A-9
A-14
A-15
DOS.)
A-1