New Installation Of Netware 6.X With The Srcrx.ham Driver; Adding Drivers And/Or Icp Raid Console To An Existing Netware Installation; Installing The Icp Raid Driver Package - Adaptec 2074700-R Manual

Installing Novell NetWare
The above procedure will only install the device drivers for your controller. The ICP
Note:
RAID controller Tools Kit (ICP RAID Console) is installed separately. See
for details.
6.2.4

New Installation of NetWare 6.x with the SRCRX.HAM Driver

1. Start the OS installation from the NetWare bootable CD-ROM. The SRCRX.HAM
driver is on the NetWare 6.x CD and is installed automatically if a RAID controller is
detected.
2. After installing the operating system, install all patches and updates from Novell and
update the SRCRX.HAM driver. For information on updating the SCSRX.HAM
driver, see
The above procedure will only install the device drivers for your controller. The ICP
Note:
RAID controller Tools Kit (ICP RAID Console) is installed separately. See
for details.
6.3 Adding Drivers and/or ICP RAID Console to an
existing NetWare Installation
The following procedures assume that the ICP RAID controller(s) is (are) already
installed in your system.
Install all Novell patches and updates prior to installing the ICP RAID controller driver
and ICP RAID Console. These updates can be found at <http://www.novell.com>.
1. Create a driver diskette from the RAID Software Suite CD-ROM. See
Create the RAID Driver Installation Diskette
2. Power on the system and boot to the OS.
3. Load the Netware Configuration Options tool:
•
NetWare 4.2x—Load INSTALL.NLM.
•
NetWare 5.x and above—Load NWCONFIG.NLM.
4. Insert the driver diskette into drive A:
5. Complete
•
NetWare 4.2x and 5.xx—Complete
Kit Package. You do not need to reinstall the driver package if you initially installed the
driver from a driver diskette that you created from the CD.
•
NetWare 6.x—Complete
installed from the NetWare 6.x CD
Controller Tools Kit Package.
6.3.1

Installing the ICP RAID Driver Package

1. Select Product options, then Install a product not listed.
72
Section 6.3.
Section 6.3.1 and/or Section 6.3.2
Section 6.3.1
for instructions.
to install your desired packages.
Section 6.3.2. to install the ICP RAID Controller Tools
SRCRX.HAM driver
to update the
and complete
Section 6.3.2
Software Installation and User's Guide
Section 6.3.2
Section 6.3.2
Section 2.2,
that was
to
install the ICP RAID