Christie Solaria One Instruction Sheet page 8

18. Using a 7/32 nut driver, remove the four nuts securing the PIB faceplate board to the faceplate
and remove the PIB faceplate board and four spacers. Set the nuts, board, and spacers aside.
19. Using a #1 Phillips
Set the handles and screws aside.
20. Remove the EMI gasket and set it aside.
Installing the faceplate kit
Complete the following procedure to install the GDC SR-1000 IMB to the Solaria One faceplate
provided in the conversion kit.
1. Place the GDC SR-1000 IMB onto the electrostatic discharge mat.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
®
screwdriver, remove the four screws securing the handles to the faceplate.
8