Christie Solaria One Instruction Sheet page 12

13. Insert the PIBS1 board and insert the 3D Sync, RS 232 PIBS1, HDMI A/LEFT, and HDMI B/
RIGHT nuts removed in step 14 of the disassembly procedure to hold the board in place. Do
not fully tighten the nuts.
14. Using the two screws set aside in step 16 of the disassembly procedure, secure the PIBS1
board to the faceplate (F). Torque the screws to 10 in-lb.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
12