Download Print this page

Christie Solaria One Instruction Sheet page 15

Retrofitting with the gdc sr-1000 imb
Hide thumbs Also See for Solaria One:

Advertisement

24. Using a 2.5 mm hex driver, loosely install all three 3mm HEX screws (O) provided with the
conversion kit. When all three screws are installed loosely, tighten them to 8 in-lb.
25. Replace the previoulsy removed EMI gasket (M).
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
15

Advertisement

loading

This manual is also suitable for:

Solaria one+