Christie Solaria One Instruction Sheet page 13

15. Torque the 3D Sync, RS 232 PIBS1, HDMI A/LEFT, and HDMI B/RIGHT nuts to 10 in-lb.
16. Connect the PIB harness (G) between the PIBS1 board and the PIB faceplate board.
17. Using a 2.5 mm hex driver, install the support bracket included with the SR-1000 kit onto the
PIBS1 board with two 3mm HEX screws (H) removed in step 12 of the disassembly procedure.
18. On the SR-1000 IMB board, disconnect the harness (I).
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
13