Christie Solaria One Instruction Sheet page 4

5. Using the two handles, pull the card cage faceplate assembly out of the card cage.
6. Place the assembly on the electrostatic discharge mat as shown.
7. Using a 14 mm wrench or deep socket, remove the GEN Lock, Sync Out, and LTC Out nuts. Set
the nuts and washers aside.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
4