7. Set the SR-1000 board aside.
8. Discard the SR-1000 faceplate.
9. Obtain the SR-1000 conversion kit parts.
10. Place the four white spacers set aside in step 18 of the disassembly procedure onto the
threaded inserts on the faceplate (D).
11. Place the PIB faceplate board set aside in step 18 of the disassembly procedure onto the
spacers.
12. Secure the PIB faceplate board to the faceplate using the four nuts set aside in step 18 of the
disassembly procedure (E). Torque the nuts to 10 in-lb.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
11