Christie Solaria One Instruction Sheet page 14

19. Remove two 4-40 Phillips #1 screws (J) and install two 4-40 x ½ Phillips #1 long screws
provided in the conversion kit.
20. Re-connect the harness.
21. Flip the SR-1000 IMB board and place the backer bracket as shown. Using a ¼ nut driver,
install one nut (K) flush with the top of the screw.
22. Place the SR-1000 board into the faceplate opening.
23. Place the backer bracket as shown and secure the second nut (N) flush with the top of the
screw as shown. Self-locking nuts don't have to be fully tightened.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
14