15. Disconnect the harness from the PIB faceplate board.
16. Using a #1 Phillips
faceplate. Set the screws aside.
17. Carefully separate the PIBS1 board from the faceplate. Set the board aside.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
®
screwdriver, remove the two screws securing the PIBS1 board to the
7