Christie Solaria One Instruction Sheet page 18

30. Install previously removed IMB license label plate (B) with two Phillips #1 screws.
31. Install the card cage faceplate assembly in the projector.
32. Using the eight #2 Phillips
card cage faceplate to the card cage. Torque the screws to 10 in-lb.
33. Apply the void warranty label as shown.
34. Place the Christie IMB (without the faceplate) into the provided electrostatic discharge bag.
35. Place the bag into the box, as shown, and cover with the top foam lid.
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet
020-102945-03 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Retrofitting the Solaria One with the GDC SR-1000 IMB
®
screws removed in step 4 of the disassembly process, secure the
18