Hawk Connector Functions And Interface Cables; Table 1: Connector Functions And Interface Cables - VersaLogic Hawk Reference Manual

Hawk Connector Functions and Interface Cables

Table 1 provides information about the function, mating connectors, and transition cables for
Hawk connectors. Page numbers indicate where a detailed pinout or additional information is
available.
Connector
Function
(Note)
J1 Input power
J2 SATA II port Latching SATA
Reserved/
J3
Not used
J4 LVDS
J6 Ethernet
Mini PCIe /
J7
mSATA socket
J10 microSD
J12 User I/O
Note: Connectors not listed are either not installed, for factory use only, or used for CPU module/baseboard
interconnect.
VL-EPU-3310 Reference Manual

Table 1: Connector Functions and Interface Cables

Mating Connector
Hirose DF11-8DS-2C (housing),
Hirose DF11-22SC x8 (crimp
socket)
—
Hirose DF19G-20S-1C (housing),
Hirose DF19-2830SCFA x19 (crimp
socket)
FCI 10073599-008LF (housing),
2mm Minitek, AWG 22-24 x8
(crimp terminal)
Mini PCIe card or VL-MPEs-F1E
Series mSATA Flash Drive
VL-F41-xxxx microSD Flash Drive
Oupiin 1204-50G00B2A
Transition
Cable Description
Cable
12" 8-pin ATX power
VL-CBR-0807
cable adapter
19.75" latching SATA
VL-CBR-0702
cable
— —
20" 18- or 24-bit LVDS
VL-CBR-2015
cable (attaches to
--or—
optional VL-CBR-2014,
VL-CBR-2016
LVDS to VGA adapter)
VL-CBR-0804 Latching Ethernet cable
— —
— —
12" 1.27 mm IDC 50-pin
VL-CBR-5016
to 50-pin
Physical Details
Refer to
page...
18
28
—
33
24
28
31
23
15