Table of Contents
Advertisement
VGA Output
A VGA monitor can be attached to the J4 connector using the VL-CBR-2014 LVDS to VGA
adapter card. Follow the procedure below to do this.
1. Plug the "Host End" of the LVDS cable VL-CBR-2015 into connector J4 of the Hawk.
2. Plug the LVDS cable into connector J1 of the VL-CBR-2014 adapter card (see Figure 18).
3. Attach the VGA monitor data cable to connector CN1 of the VL-CBR-2014 adapter cable.
External Speaker
Connector J12 includes a speaker output signal at pin 39. The VL-CBR-5016 paddleboard
provides a piezoelectric speaker. Figure 19 on page 37 shows the location of the piezoelectric
speaker on the VL-CBR-5016 paddleboard.
VL-EPU-3310 Reference Manual
Figure 18. VL-CBR-2014 LVDS to VGA Adapter Card
Interfaces and Connectors
34
Advertisement
Table of Contents
