Figure 7. Hardware Assembly With Heat Plate Up - VersaLogic Hawk Reference Manual

Physical Details
Heat Plate Up
Use this assembly method if you are adding a heatsink to the standard Hawk heat plate. Figure 7
shows the assembly including the optional HDW-405 mounting plate and optional HDW-406
heatsink.

Figure 7. Hardware Assembly with Heat Plate Up

The recommended assembly method for this configuration is as follows:
1. Attach the heatsink to the Hawk heat plate.
2. Attach the baseboard to the mounting plate (VL-HDW-405) with standoffs.
3. Attach the mounting plate to the enclosure.
Additional thermal options are available for the Hawk. Refer to page 6 for more information.
VL-EPU-3310 Reference Manual 13