Ethernet Interface; Ethernet Connector; Table 7: J6 Ethernet Connector Pinout; Figure 13. J6 Ethernet Connector Pin Orientation - VersaLogic Hawk Reference Manual

Ethernet Interface

The Hawk features an Intel I210 Gigabit Ethernet controller. The controller provides a standard
IEEE 802.3 Ethernet interface for 1000Base-T, 100Base-TX, and 10Base-T applications. Drivers
are readily available to support a variety of operating systems.

Ethernet Connector

An 8-pin, right angle, latching Ethernet connector (J6) is provided to make connection with a
Category 5 or 6 Ethernet cable. The Ethernet controller auto-negotiates connection speed. The
interface uses IEC 61000-4-2-rated TVS components to help protect against ESD damage.
Pin Signal
1 MDI3_N
3 MDI1_N
5 MDI2_N
7 MDI0_N
VL-EPU-3310 Reference Manual

Table 7: J6 Ethernet Connector Pinout

Function
Bi-directional pair D–
Bi-directional pair B–
Bi-directional pair C–
Bi-directional pair A–

Figure 13. J6 Ethernet Connector Pin Orientation

Interfaces and Connectors
Pin Signal
2 MDI3_P Bi-directional pair D+
4 MDI1_P Bi-directional pair B+
6 MDI2_P Bi-directional pair C+
8 MDI0_P Bi-directional pair A+
Function
24