Vl-Epm-24 Connector Functions And Interface Cables - VersaLogic Tiger Reference Manual

VL-EPM-24 C
ONNECTOR
Table 1 provides information about the function, mating connectors, and transition cables for
VL-EPM-24 connectors. Page numbers indicate where a detailed pinout or further information is
available.
Connector Function
J1 JTAG in-system
programming
J2 PCI
IDE – HD, CD-
J3
ROM, or DOM
Main I/O – 4 COM,
J4
2 USB host, 1 USB
client, audio in/out,
LED, speaker,
power button, reset
Gigabit Ethernet
J5
J6 SPX
J7 USB 3-6
J8 ISA
J9 Main Power Input
J10 SO-DIMM
3
J11 LVDS
1. The PCB Origin is the mounting hole to the lower left.
2. VL-CBR-4405 44-pin to 40-pin adapter required to connect to 3.5" IDE drives with 40-pin connectors.
3. A VGA monitor can be connected to J11 using the VL-CBR-2014 LVDS to VGA adapter card.
VL-EPM-24 Reference Manual
F
UNCTIONS AND
Table 1: Connector Functions and Interface Cables
Mating Connector
—
AMP 1375799-1
FCI 89947-144LF
FCI 89361-350LF
RJ45
FCI 89361-714LF
FCI 89361-716LF
AMP 1375795-2
Berg 69176-010 (housing)
+ Berg 47715-000 (pins)
DDR2 RAM
Molex 51146-2000
(housing)
Molex 50641-8041 (pins)
I C
NTERFACE ABLES
Transition
Cable Cable Description
— —
— —
VL-CBR- 12" 44-pin 2 mm
2
4406 latching / two 44-pin 2
mm
VL-CBR-5012 50-pin I/O cable to
breakout board
— —
VL-CBR-1401 2 mm 14-pin IDC, 2 or 4
or SPX device cable
VL-CBR-1402
VL-CBR-1603 12" 2 mm 16-pin to 16-
pin IDC
— —
VL-CBR-1008 Interface from standard
ATX power supply
— —
VL-CBR-2012 24-bit TFT FPD using
or 20-pin Hirose conn. or
VL-CBR-2010 18-bit TFT FPD using
or 20-pin Hirose conn. or
VL-CBR-2011 18-bit TFT FPD using
20-pin JAE conn.
Physical Details
1
Pin 1 Location
x coord. y coord. Page
—
3.220 3.494
0.450 3.139 37
-0.258 1.211 30
-0.500 1.228 32
0.024 0.523 26
— — 39
3.120 0.504 35
0.050 0.200 37
0.298 -0.126 20
— —
22
— — 27
16