Figure 3. Typical Development Configuration - VersaLogic Hawk Reference Manual

J4
HAWK
Baseboard
CPU Module
VL-CBR-2015 or
VL-CBR-2016
1. Attach Cables and Peripherals

Attach an LVDS monitor to connector J4 of the baseboard using the VL-CBR-2015 or
VL-CBR-2016 cable.

Attach SATA hard disk to connector J2 of the baseboard using the VL-CBR-0701 or VL-
CBR-0702 cable.

Attach the user I/O paddleboard, VL-CBR-5016, to connector J12 of the baseboard.

Connect a USB keyboard and USB mouse to one of the USB Type-A connectors (J1 or
J7) on the paddleboard.

Attach a USB CD-ROM drive to one of the USB Type-A connectors (J1 or J7) on the
paddleboard.
2. Connect Power Source

Plug the power adapter cable VL-CBR-0807 into socket J1 of the baseboard. Attach the
motherboard connector of the ATX power supply to the adapter.

Attach an ATX power cable to any 3.5-inch drive not already attached to the power
supply (hard drive or CD-ROM drive).
VL-EPU-3310 Reference Manual
VL-CBR-5016
J4
Paddleboard
J1 J7
ATX
J1
Power Supply
VL-CBR-
0807
J12 VL-CBR-0401
SATA
J2
Hard Drive
VL-CBR-
0701/0702
LVDS

Figure 3. Typical Development Configuration

Configuration and Setup
USB Keyboard
and USB Mouse
USB CD-
ROM Drive
OS Installation
CD-ROM
8