Setting The Blank Time Of The Lap Button Lap Blank Time - KTM 1190 RC8 R Owner's Manual

CONTROLS

Setting the blank time of the LAP button LAP BLANK TIME

5.59
–
Press the MODE button briefly.
–
Press the button
info display.
–
Press the MODE button briefly.
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the button
–
Press the button
–
Press the MODE button briefly.
–
Press the button
–
Press the MODE button briefly.
LAP BLANK T. appears on the info display.
Info
At delivery, LAP BLANK T. is set to 10 seconds.
401168-01
Tip
With LAP BLANK TIME function, you can prevent the lap from being timed too
short. This may happen if you accidentally press the LAP button twice in a row.
–
Set the blank time of the LAP button with the button
Info
LAP BLANK T. can be set between 1 and 200.
–
Press the MODE button briefly.
briefly and repeatedly until the symbol
and the button for 3 - 5 seconds.
twice until the symbol shows SETTINGS in the info display.
once until the symbol shows LAP BLANK TIME in the info display.
shows EXIT SETUP in the
or the button .
85