Invacare MyOn Active User Manual page 83

9.11 Adjusting Swingaway Padded Armrest Height
1. Remove the swingaway padded armrest (A) from the arm socket
(B).
2. Remove the mounting bolt (C), two washers (D) and locknut (E)
mounted in the arm socket that determine the swingaway padded
armrest height.
3. Reposition mounting bolt and one washer to one of five positions
(F) in the arm socket depending on the desired height.
4. Retighten the mounting bolt and washer to the arm socket with the
remaining washer and locknut.
5. Reinstall the swingaway padded armrest into the arm socket.
6. Repeat STEPS 1-5 for the opposite side, if necessary.
Part No 1167417
A
D
C
F
FIGURE 12 Adjusting Swingaway Padded Armrest Height
83
9 ARMS
B
D
E
Invacare® MyOn®