11.8 Installing/Removing the Spreader Bar
For this procedure, refer to FIGURE 8.
To remove spreader bar, reverse this procedure
1.
Remove the end caps from the back canes.
2.
Remove the handles (A) from the back canes (B).
3.
Install the inserts (C) into the back canes.
4.
Secure the inserts with mounting screws (D).
5.
Install the handles on the back canes.
6.
Align the spreader bar (E) ends with the handles of the back canes.
7.
Secure the spreader bar to the back canes with the mounting bolts
(F).
11.9 Installing/Removing the Stroller Handles
For this procedure, refer to FIGURE 9.
To remove the stroller handles, reverse this
procedure
1.
Press release button (A) in and insert the stroller handle (B) into
the stroller handle bracket (C) until bottom release button locks in
place.
2.
Repeat STEP 1 to install the remaining stroller handle.
Part No 1167417
F
A
C
FIGURE 8
Installing/Removing the Spreader Bar
A
C
FIGURE 9
Installing/Removing the Stroller Handles
101
11 SEAT/BACK
E
D
B
Invacare® MyOn®
B