Invacare MyOn Active User Manual page 103

11.11 Using the Headrest/Back Bracket

For this procedure, refer to FIGURE 11.
Adjusting the Headrest
1. Loosen the locking handle (A).
2. Adjust the headrest (B) up, down, forward or back to the desired
position.
3. Tighten the locking handle.
Installing/Removing the Headrest/Back Bracket
Headrest: If used, the headrest is mounted to the

back bracket and will be installed onto the
wheelchair with the back bracket.
Reverse this procedure to remove the back
bracket with headrest or back bracket only.
1. Loosen, but do not remove the two lock knobs (C).
2. Lower the hook end (D) of the back bracket (E) down onto the
exposed threads of the two lock knobs.
3. Securely tighten the two lock knobs.
Part No 1167417
B
D
FIGURE 11
103
11 SEAT/BACK
A
C
E
Using the Headrest/Back Bracket
Invacare® MyOn®
C
D