Invacare MyOn Active User Manual page 67

8.5 Replacing Mounting Pin on 70°, 80° and 90° Front
Rigging

For this procedure, refer to FIGURE 7.
1. Remove the front rigging (A) from wheelchair (B).Refer to
Installing/Removing Front Riggings on page 49.
2. Remove mounting screw (C) that secures the mounting pin (D) to
the front rigging (A).
3. Remove mounting pin (D) from front rigging (A).
4. Install new mounting pin (D) into front rigging (A).
5. Secure new mounting pin (D) to front rigging (A) with mounting
screw (C). Securely tighten.
6. Install front rigging (A) onto wheelchair (B). Refer to
Installing/Removing Front Riggings on page 49.
Part No 1167417
B
FIGURE 7 Replacing Mounting Pin on 70°, 80° and 90° Front Rigging
67
8 FRONT RIGGINGS
D
A
C
Invacare® MyOn®