8 Front Riggings
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
8.1
Adjusting Footrest Height
For this procedure, refer to FIGURE 1 on page 64.
MyOn and MyOn Active
1.
Loosen the mounting screw (A).
2.
Adjust the footrest (B) to the desired height.
3.
Securely tighten mounting screw after adjustment.
4.
If necessary, repeat STEPS 1-3 to adjust remaining footrest.
Part No 1167417
63
8 FRONT RIGGINGS
Invacare® MyOn®