9 ARMS
9.8
Adjusting the Height and Depth of the Flip Back Arms
For this procedure, refer to FIGURE 9.
This procedure cannot be performed on non adjustable height flip back arms.
Adjusting Height
1.
Remove the flip back armrest (A) from the wheelchair. Refer to Removing/Installing Flipback Armrests on page 77.
2.
Loosen the mounting screw (B).
3.
Adjust armrest (C) to desired height based upon preset adjustment holes (C).
4.
Tighten mounting screw.
Adjusting Depth
1.
Loosen the two mounting screws (D).
2.
Slide armrest pad (E) to desired depth.
3.
Retighten mountings screws.
Invacare® MyOn®
D
B
FIGURE 9 Adjusting the Height and Depth of the Flip Back Arms
D
78
E
C
A
Part No 1167417