11 SEAT/BACK
11.10 Adjusting the Stroller Handle
For this procedure, refer to FIGURE 10.
Stroller Handle Assembly Angle
1.
Loosen but do not remove the lower mounting screw (A).
2.
Rotate the stroller handle assembly (B) to the right or left to the
desired position.
3.
Securely tighten the lower mounting screw.
4.
Repeat STEPS 1-3 to Adjust the remaining stroller handle.
Stroller Handle Tilt
1.
Loosen the locking handle (C).
2.
Tilt the stroller handle (D) to backward or forward to the desired
position.
3.
Tighten the locking handle.
4.
Repeat STEPS 1-3 to Adjust the remaining stroller handle.
Stroller Handle Angle
1.
Loosen but do not remove the upper mounting screw (E).
2.
Rotate the stroller handle (D) to the right or left to the desired
position.
3.
Securely tighten the upper mounting screw.
4.
Repeat STEPS 1-3 to Adjust the remaining stroller handle.
Invacare® MyOn®
D
C
FIGURE 10
102
E
B
A
Adjusting the Stroller Handle
Part No 1167417