Table of Contents
Advertisement
Available languages
Available languages
8 FRONT RIGGINGS
8.4 Adjusting Elevating Legrest Calfpad Height and
Depth
Adjusting Calfpad Height
For this procedure, refer to FIGURE 5.
1.
Loosen the adjustment knob (A) that secures the calfpad bracket
(B) to the elevating legrest assembly (C).
2.
Adjust the calfpad bracket up or down to desired height.
3.
Securely tighten the adjustment knob.
4.
If necessary, repeat STEPS 1-3 to adjust remaining calfpad bracket.
Adjusting Calfpad Depth
For this procedure, refer to FIGURE 6.
1.
Remove the mounting screw (A), washer (B), and locknut (C) that
secure the calfpad (D) to the calfpad bracket (E).
2.
Secure the calfpad to one of four depth adjustment holes (F) using
the mounting screw, washer and locknut. Tighten securely.
3.
If necessary, repeat STEPS 1-3 to adjust remaining calfpad assembly.
Depth adjustment is only available on MyOn and
MyOn Active.
Invacare® MyOn®
FIGURE 5
D
A,B,C
E
F
FIGURE 6
66
A
C
Adjusting Calfpad Height
Adjusting Calfpad Depth
Part No 1167417
B
Advertisement
Table of Contents
