Motor And Camshaft Replacement - Pentair AUTOTROL 368 Installer Manual

Installer manual Autotrol 368 (604-606) - Maintenance
9.4.6

Motor and camshaft replacement

1. Turn the locking clip (3) on the left to unlock the controller (2).
2. Remove the controller (2) from the valve body (1).
Caution - material
Be careful with cables connections when disassembling the controller (2).
3. Loosen the screws (6) and remove the clamp (5).
4. Remove and disassemble the camshaft (7) from the motor (4).
5. Reverse above procedure steps to rebuild.
Ref. MKT-IM-007 / D - 09.10.2020 49 / 60