Time Of Day; Brine Dosage; Time Clock Regeneration (604 Only); Volumetric Regeneration (606 Only) - Pentair AUTOTROL 368 Installer Manual

Installer manual Autotrol 368 (604-606) - Programming
Parameter
description
Calendar override
(only 606)
System selection
6.4

Time of day

Set the current time.
1. Press until desired hour appears then release.
ð Range from 0 through 23 hours.
ð The elapsed minutes will reset to zero when the hours
are changed.
6.5

Brine dosage

Set the brine dosage.
1. Press until desired brine dosage appears then release.
ð Range from 0.2 kg to 6.0 kg;
from 0.2 kg to 1.0 kg by increments of 0.05 kg;
from 1.0 kg to 3.0 kg by increments of 0.1 kg;
from 3.0 kg to 6.0 kg by increments of 0.5 kg.
6.6 Time clock regeneration (604 only)
Set the time between each regeneration.
1. Press until desired brine dosage appears then release.
ð Range from 0 through 30;
0 = Disabled;
0.3 = Regeneration every 8 hours: at 2, 10 and 18 hours;
0.5 = Regeneration every 12 hours: at 2 and 14 hours;
1 – 30 = Regeneration every X days (every 3 days in this
example).
6.7 Volumetric regeneration (606 only)
Set the capacity in [m
34 / 60
Range of Default
values value
0 - 30 3
1 - 4 1
3
] between each regeneration.
Units of
measure
day 0 = Disabled;
0.3 = Regeneration every 8 hours:
at 2, 10 and 18 hours;
0.5 = Regeneration every
12 hours: at 2 and 14 hours;
1 – 30 = Regeneration every
X days.
- See Programmed settings
[ Page 35].
→
Ref. MKT-IM-007 / D - 09.10.2020
Notes