Power Head And/Or Motor Replacement; Valve With Nxt Controller - Pentair FLECK 2910 NXT Installer Manual

Installer manual Fleck 2910 NXT/NXT2 - Maintenance
9.4.2

Power head and/or motor replacement

9.4.2.1

Valve with NXT controller

Info
As the DC motor is equipped with an AC to DC converter, AC and DC motors can be used
with the NXT controller.
1. Using a flat screwdriver, unscrew (1) and open the cover (2).
2. Using a Philips screwdriver, unscrew (3) and open the controller (4).
3. Disconnect the motor (6).
4. Using pliers, remove the connecting pin (5).
5. Using a 19 mm wrench, unscrew the brine valve nut (9).
6. Using a flat screwdriver or an 11 mm wrench, unscrew (8) and remove the motor (6).
7. Remove microswitches (7) and the cams (10), see Micro-switches replacement [}Page 144]
and Cams replacement [}Page 146].
8. Change the motor (6) and reverse above procedure steps to rebuild
AC motor
134 / 172
DC motor
Ref. MKT-IM-002 / E - 12.11.2019