Motor And Camshaft Replacement - Pentair AUTOTROL 604 Installer Manual

Installer Manual Autotrol 368 / 604-606 - Maintenance

9.2.6. Motor and camshaft replacement

No.
A Turn the locking clip (3) on the left to unlock the controller (2).
B Remove the controller (2) from the valve body (1).
A
Caution
Be careful with cables connections when disassembling the controller (2).
C Loosen the screws (6) and remove the clamp (5).
D Remove and disassemble the camshaft (7) from the motor (4).
E Reverse above procedure steps to rebuild.
42 / 54
Operation
Ref. MKT-IM-007 / A - 16.12.2016