Table of Contents
Advertisement
9.4.2
Power head and/or motor replacement
9.4.2.1
Valve with NXT controller
Info
As the DC motor is equipped with an AC to DC converter, AC and DC motors can be used
with the NXT controller.
1. Using a flat screwdriver, unscrew (1) and open the cover (2).
2. Using a Philips screwdriver, unscrew (3) and open the controller (4).
3. Disconnect the motor (6) and the microswitches (7).
4. Using pliers, remove the connecting pin (5).
5. Using a 19 mm wrench, unscrew the brine valve nut (9).
6. Using a flat screwdriver or an 11 mm wrench, unscrew (8) and remove the motor assembly
(6).
7. Change the motor (6) and reverse above procedure steps to rebuild
Ref. MKT-IM-031 / D - 16.01.2023
Installer manual Fleck 2850 NXT/NXT2 - Maintenance
143 / 174
Advertisement
Table of Contents
