Manifold/Bypass Removal - Pentair AUTOTROL 368 Installer Manual

Installer manual Autotrol 368 (604-606) - Maintenance
9.4.5

Manifold/bypass removal

Info
Depending on the installation configuration, the valve may be equipped with a manifold
or a bypass.
The following procedure applies to both configuration.
1. Remove the "U" clips (1) (a screwdriver can be used as a lever if required).
2. Remove the manifold/bypass (2) from the valve body (3).
48 / 60
3
Ref. MKT-IM-007 / D - 09.10.2020
1
2
4