Power Head And/Or Motor Replacement - Pentair FLECK 2850 SXT Installer Manual

Installer manual Fleck 2850 SXT - Maintenance
9.4.2

Power head and/or motor replacement

1. Using a flat screwdriver, unscrew (2) and open the cover (1).
2. Open the controller (3).
3. Using pliers, remove the circlip (11) and free the arm (4).
4. Using a flat screwdriver or a 11 mm wrench remove (10).
5. Using a 19 mm wrench, remove (9) the motor (6) and the power head (5).
6. Remove the microswitches (7) and cams (8), see Micro-switches replacement, and Cams
replacement [ Page 81].
→
7. Replace the motor (6) and/or the power head (5).
8. Reverse above procedure steps to rebuild.
Ref. MKT-IM-030 / C - 12.05.2020 75 / 104