Serial Label Location; Hazards; Personnel - Pentair AUTOTROL 368 Installer Manual

Installer manual Autotrol 368 (604-606) - Safety
2.2

Serial label location

Electrical rating
Production date
Production order
Serial number
Mandatory
Ensure that the serial label and the safety labels on the device are completely legible
and clean !
If necessary, replace them with new labels in the same positions.
2.3

Hazards

All the safety and protection instructions contained in this document must be observed in order to
avoid temporary or permanent injury, damage to property or environmental pollution.
At the same time, any other legal regulations, accident prevention and environmental protection
measures, as well as any recognized technical regulations relating to appropriate and risk-free
methods of working which apply in the country and place of use of the device must be adhered to.
Any non-observation of the safety and protection rules, as well as any existing legal and technical
regulations, will result in a risk of temporary or permanent injury, damage to property or
environmental pollution.
2.3.1

Personnel

CAUTION
Risk of injury due to improper handling!
Only qualified and professional personnel, based on their training, experience and
instruction as well as their knowledge of the regulations, safety rules and operations
performed, are authorized to carry out necessary work.
10 / 60
Model
Part number
Ref. MKT-IM-007 / D - 09.10.2020