Table of Contents
Advertisement
Working with Presets
How to create your own Presets
Besides the very simple method with bu�ons only, described above (see
Panorama with automa�c shoo�ng pa�ern), and the url with parameters
method, like 192.168.8.1/preset?b=1&f=30&p=2 (see Programming a pre-
set using parameters), the following is the method using the UI.
A�er accessing the MECHA-H web User Interface (UI) using a device, as we
showed in chapter DAC test using the UI, tap [Row] to access Row page.
An easy way to create a preset is to select one from the Presets list, and edit
it as needed, then save it with a different name.
First, let's analyze the default presets. Before you overwrite them:
• Bu�on 1, Bu�on 2, and Bu�on 3 are default presets consis�ng of 4, 6,
and 8 shots respec�vely (for a single MECHA). These presets can be also
executed with MECHA's bu�ons [1], [2], and [3], in combina�on with
le� � or right � bu�ons.
• DAC TEST 1312 Parked - 12 shots around, 3 rows ‒ at 0° and +/-45° ‒ plus
zenith and nadir, star�ng from parked posi�on.
• DAC TEST 1313 Level - 12 shots around, 3 rows ‒ at 0° and +/-45° ‒ plus
zenith and nadir, star�ng from level posi�on.
• DAC TEST 1321 Raised - 12 shots around, 3 rows ‒ at 0° and +/-45° ‒ plus
zenith and nadir, star�ng from raised posi�on.
• TEST 131 - 6 shots around (for a single MECHA).
• TEST 132 - 12 shots around (for a single MECHA).
• More from Server - this is an op�on that allows you to get more presets
from server. See chapter Download More Presets from Server.
Note that MECHA accessed by 192.168.8.1 (as we did) is in AP mode,
and [More from Server] is not available.
MECHA Controller C1 (or MECHA) works in two network modes:
Access Point (AP) and Sta�on (STA). AP mode allows it to create its own
network and have up to 5 devices to connect to it. STA mode allows it to
connect to a Wi-Fi network (for example, one created by your wireless
router), ac�ng as a client.
63
MECHA User's Guide v.05.4 ‒ Dual Axis
© 2020 FANOTEC
Advertisement
Table of Contents
