Current Codes List - Nodal Ninja Fanotec MECHA User Manual

Current Codes list

1< 1>
or
Executes the Preset 1 to the le� or to the right.
By default, Preset 1 consists of 4 shots around, or it is the preset saved
with the [Save1] UI bu�on.
2< 2>
or
Executes Preset 2 to the le� or to the right.
By default, Preset 2 consists of 6 shots around, or it is the preset saved
with the [Save2] UI bu�on.
3< 3>
or
Executes Preset 3 to the le� or to the right.
By default, Preset 3 consists of 8 shots around, or it is the preset saved
with the [Save3] UI bu�on.
131< 131>
or
Execute a test pano for a single MECHA, to the le� or to the right (6 shots
around).
132< 132>
or
Execute a test pano for a single MECHA, to the le� or to the right (12
shots around).
1312< 1312>
or
Execute a test pano for MECHA DAC, to the le� or to the right (12 shots
around, 3 rows ‒ at 0° and and at +/-45° ‒ plus zenith and nadir). The
code must be entered in MECHA-H, and the MECHA-V must be parked
i.e. oriented upward, as for zenith photo.
1313< 1313>
or
Same as 1312, but with MECHA-V in horizontal posi�on. First �me,
please test the codes without camera mounted on the panohead. The
tests can be stopped by pressing the power bu�on, ⏻.
1321< 1321>
or
Same as 1312, but with the MECHA-V in raised posi�on. First �me,
please test the codes without camera mounted on the panohead. The
tests can be stopped by pressing the power bu�on, ⏻.
MECHA User's Guide v.05.4
© 2020 FANOTEC
102